Video #1 in the "how to clean and re assemble your fader" for the Rane TTM57 mixer. In this first video we open the mixer and do a quick cleaning of the rails. Be sure to check out all 3 videos. MAKE SURE THE POWER IS OFF TO THE MIXER. I even like to unplug the power cord from the back as well. Tools needed - Philips head screwdriver Deoxit FL-5 or DN-5 (to clean) Deoxit F100L (to lube) Q-tips to rub the rails It's pretty simple.......and I mention this at least 5 times in the videos - If you take the ribbon cable off, make sure you put it back on the proper way. On the green circut board next to the pins, you will see "J1" printed on the board. The red side of the ribbon cable attaches to the "J1" side of the board. Make sure you do this properly. If the ribbon cable detaches from the main board of the mixer, when you re-attach them --Make sure the red line on the ribbon cable is pointing to the right. Make sure you do this properly. If not connected properly, you can fry your fader.
Friday, December 7, 2012
TTM57 Cleaning the faders (1of3) - Quick clean method
TTM57 Cleaning the faders (1of3) - Quick clean method Tube. Duration : 3.65 Mins.
Video #1 in the "how to clean and re assemble your fader" for the Rane TTM57 mixer. In this first video we open the mixer and do a quick cleaning of the rails. Be sure to check out all 3 videos. MAKE SURE THE POWER IS OFF TO THE MIXER. I even like to unplug the power cord from the back as well. Tools needed - Philips head screwdriver Deoxit FL-5 or DN-5 (to clean) Deoxit F100L (to lube) Q-tips to rub the rails It's pretty simple.......and I mention this at least 5 times in the videos - If you take the ribbon cable off, make sure you put it back on the proper way. On the green circut board next to the pins, you will see "J1" printed on the board. The red side of the ribbon cable attaches to the "J1" side of the board. Make sure you do this properly. If the ribbon cable detaches from the main board of the mixer, when you re-attach them --Make sure the red line on the ribbon cable is pointing to the right. Make sure you do this properly. If not connected properly, you can fry your fader.
Video #1 in the "how to clean and re assemble your fader" for the Rane TTM57 mixer. In this first video we open the mixer and do a quick cleaning of the rails. Be sure to check out all 3 videos. MAKE SURE THE POWER IS OFF TO THE MIXER. I even like to unplug the power cord from the back as well. Tools needed - Philips head screwdriver Deoxit FL-5 or DN-5 (to clean) Deoxit F100L (to lube) Q-tips to rub the rails It's pretty simple.......and I mention this at least 5 times in the videos - If you take the ribbon cable off, make sure you put it back on the proper way. On the green circut board next to the pins, you will see "J1" printed on the board. The red side of the ribbon cable attaches to the "J1" side of the board. Make sure you do this properly. If the ribbon cable detaches from the main board of the mixer, when you re-attach them --Make sure the red line on the ribbon cable is pointing to the right. Make sure you do this properly. If not connected properly, you can fry your fader.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment